Model No.: 1500RF
This card dispenser model is a highly efficient automatic equipment which can automaticallyissue/reclaim cards, can be applied to card consumption systems,such as smart parking lot, smart card vending system,card issuance/verification system etc.
Description: How the card dispenser working?
When it is power-on, card dispenser will automatically detect all its photoelectric sensors, to detect whether the card is in pre-empty state or empty state(with alarming signal and buzzing output)and test the wayside inductor signal, key-press input; automatically preset the card to the required position; dispense cards with high speed or safely capture the invalid cards according to the command of the system client-side.
After powering on,if there are cards in the stack holder,dispenserR will automatically fill a card in the slit, and execute the command to transmit the card to the slot while a command of dispensing is received,via R/W the card to verify whether the card should be dispensed normally, if normal then waitfor a client to extract the card,if the card hasn’t been extracted in a certainperiod of time then the card will be reclaimed; if the equipment receives a level signal to reclaim during the waiting period,then it will reclaim the card immediately.
During the process of filling/dispensing/reclaiming, if the card is deformed, stained or there is a local malfunction, the dispenser willautomatically adjust the card and have reciprocating-motions for five times,if still not right, it will stop all actions,wait a next command or manual intervention while sending an error signal to client-side,at the same time the buzzer will buzz to alarm the error and the LED will flash along.
When the card stack holder is in pre-empty state,dispenser will output a “short of cards” signal while the buzzer will be alarming with flashing LCD. When there is no card in the cylinder,dispenser will output an “empty” signal likewise.
- Dispense Mifare Card 13.56MHz card with read and write module
- Unique transfer wheel design for Accurate issuing any card even for concavo-convex character number card
- Simple, convenient, stable and accurate adjusting kinds of different thickness for issuing different cards
- Compact size design to save the installation space
- Reclaim card tank design in rear of machine for easy management
- Couple of sensor can detect reclaim card tank is full, card tank empty alarm, card position detect etc, can easy distinguish card position and status.
- High strength and durable engineer plastic card channel make sure RF card read/write steady
- Industry conceiving, surface dealing with roast paint, well bearable cubing and rotting. Be suitable to all kinds of bad environment, such as high, low, and mush dust, etc.
- Multi- sensor protect function prevent outer light interference to sensor
- Parking lot card issuing system
- Self-Service Machines
- Automatic ticketing machines